Product Description
10ft long with split at 3ft from the end. IR Resources emitter cable is 30awg and more durable then all the leading competition. The thicker cable allows user to place the cable neatly under the device and to the window with no worries of the cable pinching or tearing. We use 3M adhesive for optimal securement. The state of the art surface mounted LED provides direct IR signal to the device IR sensor.
NOTE:
All IR Resources emitters and IR extension cable are compatible with most IR devices and name brand IR repeater kits, media centers, etc. The device must have 3.5mm.jack to plug the IR emitter into(usually marked IR OUT). We make our cable from raw copper and shield wrap before covering with CL3 rated material for the cable jacket.
All IR Resources emitters and IR extension cable are compatible with most IR devices and name brand IR repeater kits, media centers, etc. The device must have 3.5mm.jack to plug the IR emitter into(usually marked IR OUT). We make our cable from raw copper and shield wrap before covering with CL3 rated material for the cable jacket.
Works with:IR Repeater systems, IR Extenders, connecting blocks,media centers. compatible with major name brands. *SlingBox , Logitech requires our 2.5mm to 3.5mm stereo adapter.
Does not work with:
IR OUT on A/V receivers.
IR OUT on A/V receivers.
DO NOT PURCHASE FOR ANY TYPE OF CATV, HD DVR STB’s, (Set Top Box) !!!!!!!! THESE ARE EMITTERS AND NOT RECEIVERS
Features:• The visible emitter eye blinks red when emitter eye transmits the Ir signal
• Excellent solution for everyone from the Home Enthusiast to the Professional Installer
• Strain relief for maximum flexibility. CL3 Rated Material/in wall install
• State of the art surface mounted LED
• Gold 3.5mm plug 7 ft lead. RoHS Compliant
• Excellent solution for everyone from the Home Enthusiast to the Professional Installer
• Strain relief for maximum flexibility. CL3 Rated Material/in wall install
• State of the art surface mounted LED
• Gold 3.5mm plug 7 ft lead. RoHS Compliant
Instructions for use:Simple Plug and Play
Plug the 3.5mm end plug into any IR OUR port
Clean the device Bezel with mild soap where the emitter will be placed
Separate the easy peel away from the Emitter adhesive tape
Place the Emitter Eye directly over the devices IR sensor on the front panel
( Front IR sensor can be located using a flashlight. Look for a small square shaped item. Or, you can look up your user manual online. The front panel page will show the location)
Plug the 3.5mm end plug into any IR OUR port
Clean the device Bezel with mild soap where the emitter will be placed
Separate the easy peel away from the Emitter adhesive tape
Place the Emitter Eye directly over the devices IR sensor on the front panel
( Front IR sensor can be located using a flashlight. Look for a small square shaped item. Or, you can look up your user manual online. The front panel page will show the location)
No comments:
Post a Comment